Mixing with water:
0,25 liters of water per 1 kg of dry mixture
Preparation of the mixture:
Pour clean and impure water into a clean stainless steel container. The dry glue is gradually added to it. The resulting solution was stirred with an electric stirrer until a homogeneous mixture without lumps was obtained. If necessary, add water or dry mixture to achieve the required density and consistency. Allow to "ripen" for about 10 minutes until all the fillers are completely dissolved, then stir again. The mixture thus obtained is ready for use and retains its properties for about 2 hours at a temperature of 20-25˚С.
Do not mix with cement, sand, etc. materials, as this leads to a deterioration in the quality of the adhesive!
Way of working:
The solution is applied on a ridge on the back of the profile with the help of a notched trowel so as to form grooves that provide space for spreading the adhesive after pressing the profile to the wall. Glue must not fall into the joints between the profiles or be removed, if any